Sinoelephant co., Ltd. is committed to the development, trial production and production of high-performance parts of carbon fiber and other composite materials in automobile and industrial fields. It is equipped with different production processes of composite materials, such as molding, RTM, vacuum leading-in and winding, etc. It provides overall solutions according to different product requirements and dimensional requirements. The second problem is that the type of grinding model level is not high, the flat place is not flat, uneven arc, the line is not suitable and so on. The final result is of inferior quality. Generally, most hand paste carbon fiber, glass fiber factory mold production is the mold master single-hander, so the above two basically under the mold master personal technology inferior. Inferior mold not only the product quality is bad, but also often means will increase the product cost.

The following picture shows the actual cases of various types of inferior carbon fiber and FRP products. The main performance is that the 1 mold line is extremely rough, 2, the product is not smooth, and the inner surface has more sloppy burrs. 1,2 is mainly a mold problem, and 3 is a problem for the operator. Some of the legends are made of FRP, but they can also represent some of the same problems with some carbon brazing.

Sinoelephant co., Ltd. is committed to the development, trial production and production of high-performance parts of carbon fiber and other composite materials in automobile and industrial fields. Carbon fiber telescopic rod;

Car modification parts.Industrial equipment manufacturing field and sports equipment.Carbon fiber robot shell processing, equipped with composite material different production processes such as molding, RTM, vacuum induction, winding, etc., according to different product requirements and dimensional requirements to provide overall solutions:

1, Lightweight and strong carrying capacity. At present, most commonly used pressure vessels are steel pressure vessels, such as gas cylinders in daily life. Pressure vessel steel structure in spite of its advantages, stable performance, design, and manufacturing technology is relatively mature, the domestic carbon fiber shell robots, has its limitations, but mechanical properties for some high-pressure vessel, if it is made from steel structure, so can only rely on increasing bearing capacity of wall thickness to improve it, this is bound to cause increase the weight, reduce the economic performance. And new type of carbon fibre composite pressure vessel, the use of very thin metal or nonmetal as a bladder, carbon fiber shell robots, using carbon fiber, glass fiber as fiber layer winding and become, because of the carbon fiber than high strength, can make whole cylinder reduce greatly, the quality of and can improve the bearing capacity of the pressure cylinder.
2, good anti-explosion performance for steel pressure vessels, once the occurrence of cracks and other dangerous early warnings will occur expansion, eventually lead to equipment accidents, which brings great hidden dangers to the safety of production. Pressure cylinders made of carbon fiber are made of multiple layers of twisted fibers, giving the tank plenty of time to deal with cracks, leaks, and other problems, as an automatic safety device set up inside the outer layer sounds the alarm. In addition, the leakage of the liner will not have a great impact on the external fiber layer, so in this case, the fiber layer can continue to work, thus ensuring the safe operation of the cylinder.